Description

Weighing and dosing system is designed for weighing and pneumatic transport of individual doses of powder.

The system consists of the supporting frame with opening walls on three sides. The fourth side is fixed and it is located in the switchboard the electrical and pneumatic control. Also located here is the control unit using a programmable you can set individual doses and modes of operation of the device. The unit can be operated from the front panel, or from the management console of the parent system.

In the upper part of the design of the weighing system is equipped with two to eight (according to the customer's requirements) the same dosing units, equipped with the dvoustupňovými pneumatickýmí output device. The dosing system is fitted in the upper part of the front piece for connection e.g. transport bags "big buggies". Lunges from the feeders are the ventilation plant room receives the navažovacího node consisting of a support frame, solid feeder with Hopper and hung tenzometrickém sensors power. Hopper is terminated by a closing device with pneumatic control, which at the same time closing the entrance to the Chamber and feeders. The space between the device and the top edge of the hopper is sealed using a cloth cover to prevent the leakage of controlled substances of fine particles into the surrounding space. Dispensers are fixed to the structure of the device. Chamber feeder is equipped with a system of internal nozzles connected via pneumatically controlled valve on the supply of compressed air. The output is through the valve and the flexible member connected to the transport pipeline.

Weighing system it is possible to add a device for cleaning the transport pipe from any nálepů. Compact unit is easily rigged forklift or crane.

The parameters of the

The dosing system is made of materials relevant to the European normán. Used pneumatic components are certified by the manufacturer. Weighing sensor is certified for ingestion in the Czech Republic. The system is delivered as a compact unit designed for the connection of compressed air, el. the power and potential of the cable for communication with the parent control system.

Method of transport is the subject of the agreement at the conclusion of the purchase contract. During transport, it is necessary to protect the parts of the system from excessive shocks and crashes. For the storage it is necessary to ensure indoor environment with a relative humidity up to 80% and the temperature range-30 ° c ÷ + 50 ° c.

To download a prospectus in Adobe PDF format, click AVDBp X-20