Double separator valve with actuator

Description

The flap is made of a welded body, the square of the input (the top) and output (bottom) side flanges, which is linked to snavazujícím technological equipment. Vbočních walls are stored the axis of rotation of the shoulder blades, rotating in the stored outside of the bearings. The axes are controlled pneumatically via a lever, located on their ends.

For the operation of the vane so that the work is always at least one closed. In the event of power failure (el. the current air) also remains at least one blade in a closed state. When you close the throttle is set correctly after the impact of the scapula to the stop kmírně the elastic deformation of the blades (damped vibration), which causes the release of any material stuck zpovrchu blades.

To include the damper control circuit for controlling the excitation of elektroventilů, controlling pneuválce. The circuit allows you to set the frequency and length of the excitation of individual valves

The use of the

Divider flap is intended for technology pipeline transporting bulk materials of odsávaných and is used to abort unwanted draught these pipelines. An example is the location of the výsypkami or elektrofiltrů under separators combustion boilers. Forced air drive allows you to use the flap for materials with a tendency to clog. (for example, municipal waste incineration fly ash).

The flap can be advantageously used for the separation of the stroke on the entry of bulk materials into Rotary tumble dryers or anywhere where there is a need to prevent unwanted moves in the transportation of bulk material between areas with different pressures, for example, under the wind sorter industrial mills.

The benefits of

Compact, durable design, high reliability, virtually maintenance-free, despite, long life.

The parameters of the

Bulk density of the material	500 ÷ 2000 kg/m3
The flowrate range of the material	see table the flowrate range mat. below
Max. dimension of grains	12 mm
The dimensions of the	see the dimensional diagram below
The implementation of	dust proof
Error weighting	Max. 2% of Qnast
Max. the distance from the weighing electronics	50 m
Range of working temperatures	-30 ° c ÷ + 50 ° c
Material slips	antiabrasive steel, polyurethane, stainless steel

The range of flow rates

	SV6P	SV12P	SV30P	SV60P	SV120P	SV300P
Flow [t/h]	1 ÷ 6	2 ÷ 12	5 ÷ 30	10 ÷ 60	20 ÷ 120	50 ÷ 300

Dimensional schema

Basic dimensions

Type/size	And	(B)	(C)	(D)	(E)	(F)
SV 6 P	200	300	150	360	474	136
ST, 12 P	250	350	200	410	474	136
SV 30 P	350	450	300	510	574	136
SV 60 P	350	450	300	510	574	136

 

To download a prospectus in Adobe PDF format, click ASVxxP_ skluzova.